Contractor Package - by Andy

These are the tools I use every day for cutting and fitting. With these a competent carpenter has what he needs to effectively move the job along.

The 36 and 24 inch rails are perfect for the square used seperately for small cuts or combined for large cross cuts.

The 2 - 50 inch tracks combined can rip sheet goods up to 8 ft and still tuck away in a case that is important for easy handling and storage in your vehicle.

The three connector sets would allow for combining any 3 sets of rails sometimes you need to cut over 8 ft on a taper.

Both types of clamps because you don't want to be changing the configuration of your clamps you want to grab and go.

The miter square is a must for speeding up either angled alike or square cuts with repeatability.

The smart table kit makes cutting easy and takes up less space than my plastic saw horses and to me works better than a PBB with a STK conversion.

The SSRK is a no brainer any contractor who sweated making that edge route with a straight edge and hoped the router stayed against the edge and didn't tip will appreciate the SSRK immediately.

The ripsizer is in a category by itself I have run about 200 4 X 8 sheets through it.  Some of the sheets were cut into 2.5 inch strips with unsurpassed accuracy and ease, portable on the job cutting that only takes one person to operate portable table saws can't do that.

The gun cases allow you to carry your tools in in one trip and carry them out just as easy. They also allow a easy view of what you have and keep your tools together.

These are the ez tools I use the most.  I love my PBB but I think someone should build into it, learn to use the tracks first.

Andy

Contractor Package Contents

Quantity	Product
2	EZ Smart Track - 50"
1	EZ Smart Track - 36"
1	EZ Smart Track - 25"
3	Self Aligning Connector Set
3	Center Connector
2	Smart Clamp
1	Smart Clamp System
1	Super Smart Router Kit
1	MIter Square
1	Smart Table Top Kit
1	EZ RipSizer - 25"
1	EZ Smart Base
1	Set of Black Cases