EurekaZone Products > Track Saw Systems > With EZSmart Reg Clamp set & Anti Chip Edges >

EZSMART Track Saw System 118" Without Base
EZSMART Track Saw System 118" Without Base


MSRP $302.00
EZSmart Price $238.00

Availability:: Usually Ships in 2 to 3 Business Days
Product Code: EZTS118NB

Description Video What Is Included

*Voted best in anti-chip protection by Fine Home Building on both sides of cut * Voted best in straightness and connection by WOOD Magazine * Voted best in Home Tech by This Old House*

The EZSmart Track Saw System gives you absolutely straight cuts with virtually zero tear-out or chipping—all with the circular saw of your choice! Unlike many similar systems, this one includes a Universal Saw Base that can be fitted to over 90% of left- or right-bladed circular saws. That means there's no need to pay a premium for a specialty saw. The saw glides effortlessly down the rail for rip cuts, cross cuts, and angle cuts. Thanks to the guide rail's zero-clearance edges and the chip-free inserts on the bottom of the base, the cut quality is far better than typical table saws. And since the wood is captive under the track, there is no danger of kickback. Includes two EZSmart Clamps capable of securing even the smallest boards under the track. Additional Guide Rails and Connectors are available separately to produce a guide rail of any length. Made in USA.

  • One Industrial Grade 54 inch track; One industrial grade 64 inch track
  • Guide rail is bi-directional, and features two anti-chip edges—use one for 90° cuts, the other for bevel cuts
  • Patent-pending anti-chip inserts provide zero clearance on either side of the blade for astoundingly clean cuts
  • Danger of kickback is all but eliminated by the included anti-kickback fin, which prevents the material from binding
  • No more lugging around a heavy table saw to job-sites; get proven results with this lightweight kit
  • Includes anti-chip inserts for use either on the guide rail or off

    • Works
    • with 99.9% of right or left hand blade saws.
    • For
    • saws with blades 6 ½ , 7 ¼ or 8 ¼ inch.
    • Provides
    • safe, straight precise cuts on or off the guide rail.
    • Replaceable
    • zero clearance anti-chip edge.
    • Clean
    • splinter free cuts.
    • Patented
    • dual sided track, cuts in both directions.
    • Cuts
    • at 90 degrees or beveled.
    • Lightweight
    • yet rugged for job site portability.

Anti-Chip Edge 54" Anti-Chip Edge 64"
Price: $7.50

Price: $8.50

Anti-Chip Edge 54" Anti Chip Edges 64"